ICON-EU
ScheduledRegional / high-resDWD · 3.5 nm · Europe
DWD's 6.5 km European nest of ICON, updated every 3 hours — a popular free choice for European coastal sailing.
When is ICON-EU updated?
ICON-EU runs eight times a day, at 00Z, 03Z, 06Z, 09Z, 12Z, 15Z, 18Z and 21Z. Data from a run typically starts to appear about 2 h 42 min after run time and is complete about 2 h 50 min after.
- Provider
- DWD (Germany)
- Region
- Europe
- Resolution
- ~3.5 nm
- Licence
- CC-BY-4.0 (DWD open data)
Schedule
Runs 00Z, 03Z, 06Z, 09Z, 12Z, 15Z, 18Z, 21Z. First data typically ~2h 42m after run time, complete after ~2h 50m.
Next run: 03Z, first data around .
Runs
The latest runs with when they actually arrived and whether that was on time, then the upcoming runs with the countdown to the first data. Times are in your timezone.
Get an alert when it is actually published
Is ICON-EU right for my area?
ICON-EU covers all of Europe and its seas, from the Canaries and Iceland to the eastern Mediterranean and the whole Baltic, so it is a good single model for a passage across several countries. Near the coast inside a finer model's area (AROME in France, ICON-D2 in Germany, MEPS in the Nordic countries and the Baltic), that model shows more local detail for the next day or two.
What regional models are for
Regional (limited-area) models cover one area in fine detail, nested inside a global model that supplies the edges. The finer grid shows land and sea breezes, wind funnelling between islands, headland effects and showers that global models smooth out. They usually run more often but reach only a day or two ahead, and only inside their area.
ICON-EU has a grid spacing of about 3.5 nm, so each value stands for a box about that size. A model needs several grid boxes to show a feature, so details smaller than about 18 nm are smoothed out or missed.
Other models for Europe
Models of the same kind that cover most of the ICON-EU area, finest grid first.
- ARPEGE EuropeMétéo-France5.9 nmtimes known
Punctuality
How reliably this model's runs are published. All models →
On time
99%
Typical delay
1 min early
Bad day
2 min late
Typical timing per run
How long after a run starts its data usually appears, for each run time. Use it to know when to check.
| Run | First data, typical | Complete, typical | Complete, slowest 10% |
|---|---|---|---|
| 00Z | +2h 41m | +3h 36m | +3h 38m |
| 03Z | +2h 40m | +2h 49m | +2h 52m |
| 06Z | +2h 44m | +3h 36m | +3h 40m |
| 09Z | +2h 40m | +2h 49m | +2h 52m |
| 12Z | +2h 44m | +3h 37m | +3h 40m |
| 15Z | +2h 44m | +2h 51m | +2h 53m |
| 18Z | +2h 44m | +3h 37m | +3h 39m |
| 21Z | +2h 44m | +2h 49m | +2h 52m |
Times after the run's start (the hour in the “Run” column, UTC).
Coverage
Compared with other models
Read more
Links
Homepage: https://www.dwd.de/EN/ourservices/nwp_forecast_data/nwp_forecast_data.html