HARMONIE DINI (DMI)
ScheduledRegional / high-resDMI · 1.1 nm · Denmark, North Sea, Baltic, Iceland
The Danish Meteorological Institute's high-resolution HARMONIE model for Danish waters, the North Sea and Baltic, plus Iceland/Greenland domains.
When is HARMONIE DINI (DMI) updated?
HARMONIE DINI (DMI) runs eight times a day, at 00Z, 03Z, 06Z, 09Z, 12Z, 15Z, 18Z and 21Z. Data from a run typically starts to appear about 1 h 34 min after run time and is complete about 2 h 58 min after.
- Provider
- DMI (Denmark)
- Region
- Denmark, North Sea, Baltic, Iceland
- Resolution
- ~1.1 nm
- Licence
- CC-BY-4.0 (DMI open data)
Schedule
Runs 00Z, 03Z, 06Z, 09Z, 12Z, 15Z, 18Z, 21Z. First data typically ~1h 34m after run time, complete after ~2h 58m.
Next run: 03Z, first data around .
Runs
The latest runs with when they actually arrived and whether that was on time, then the upcoming runs with the countdown to the first data. Times are in your timezone.
Get an alert when it is actually published
Is HARMONIE DINI (DMI) right for my area?
Use DMI HARMONIE for Danish waters: the Kattegat, the Danish straits, the Skagerrak, the western Baltic and the North Sea off Denmark. DMI also runs it for Iceland and Greenland. In the rest of the Baltic MEPS covers more; in Danish waters, compare the two.
What regional models are for
Regional (limited-area) models cover one area in fine detail, nested inside a global model that supplies the edges. The finer grid shows land and sea breezes, wind funnelling between islands, headland effects and showers that global models smooth out. They usually run more often but reach only a day or two ahead, and only inside their area.
HARMONIE DINI (DMI) has a grid spacing of about 1.1 nm, so each value stands for a box about that size. A model needs several grid boxes to show a feature, so details smaller than about 5.4 nm are smoothed out or missed.
Other models for Denmark, North Sea, Baltic, Iceland
Models of the same kind that cover most of the HARMONIE DINI (DMI) area, finest grid first.
- ICON-EUDWD3.5 nmtimes known
- ARPEGE EuropeMétéo-France5.9 nmtimes known
Punctuality
How reliably this model's runs are published. All models →
On time
96%
Typical delay
20 min early
Bad day
1 min late
Typical timing per run
How long after a run starts its data usually appears, for each run time. Use it to know when to check.
| Run | First data, typical | Complete, typical | Complete, slowest 10% |
|---|---|---|---|
| 00Z | +1h 33m | +2h 37m | +2h 56m |
| 03Z | +1h 34m | +2h 40m | +2h 55m |
| 06Z | +1h 35m | +2h 35m | +2h 55m |
| 09Z | +1h 36m | +2h 40m | +3h 05m |
| 12Z | +1h 37m | +2h 39m | +3h 08m |
| 15Z | +1h 34m | +2h 40m | +2h 54m |
| 18Z | +1h 34m | +2h 36m | +2h 58m |
| 21Z | +1h 34m | +2h 40m | +2h 55m |
Times after the run's start (the hour in the “Run” column, UTC).
Coverage
Compared with other models
Read more
Links
Homepage: https://www.dmi.dk/
Data: https://registry.opendata.aws/dmi-opendata/
Documentation: https://opendatadocs.dmi.govcloud.dk/en/Data/Forecast_Data