NAM
ScheduledRegional / high-resNorth American Mesoscale · NOAA / NCEP · 6.5 nm · North America
NOAA's 12 km North American model with a 3 km CONUS nest, four runs a day.
When is NAM updated?
NAM runs four times a day, at 00Z, 06Z, 12Z and 18Z. Data from a run typically starts to appear about 1 h 38 min after run time and is complete about 2 h 42 min after.
- Provider
- NOAA / NCEP (USA)
- Region
- North America
- Resolution
- ~6.5 nm
- Licence
- Public domain (US Government)
Schedule
Runs 00Z, 06Z, 12Z, 18Z. First data typically ~1h 38m after run time, complete after ~2h 42m.
Next run: 06Z, first data around .
Runs
The latest runs with when they actually arrived and whether that was on time, then the upcoming runs with the countdown to the first data. Times are in your timezone.
Get an alert when it is actually published
What regional models are for
Regional (limited-area) models cover one area in fine detail, nested inside a global model that supplies the edges. The finer grid shows land and sea breezes, wind funnelling between islands, headland effects and showers that global models smooth out. They usually run more often but reach only a day or two ahead, and only inside their area.
NAM has a grid spacing of about 6.5 nm, so each value stands for a box about that size. A model needs several grid boxes to show a feature, so details smaller than about 32 nm are smoothed out or missed.
Other models for North America
Models of the same kind that cover most of the NAM area, finest grid first.
Punctuality
How reliably this model's runs are published. All models →
On time
100%
Typical delay
on time
Bad day
2 min late
Typical timing per run
How long after a run starts its data usually appears, for each run time. Use it to know when to check.
| Run | First data, typical | Complete, typical | Complete, slowest 10% |
|---|---|---|---|
| 00Z | +1h 39m | +2h 41m | +2h 42m |
| 06Z | +1h 40m | +2h 42m | +2h 44m |
| 12Z | +1h 38m | +2h 41m | +2h 42m |
| 18Z | +1h 40m | +2h 42m | +2h 44m |
Times after the run's start (the hour in the “Run” column, UTC).